<H6>How to set Auto Power On+External switch button extension

Overview:
Auto-start at boot: Also known as Auto Power On, it means that as long as the industrial control motherboard or industrial control computer is turned on, the industrial control motherboard or industrial control computer can automatically turn on and enter the system to start working.
Why do industrial motherboards or industrial computers have this function?
​Because industrial control motherboards or industrial control computers are usually used in unattended places, such as vending machines, express cabinets, advertising machines, production lines, processing equipment, traffic control, security monitoring, medical care, banking equipment, etc. , there is no dedicated person for maintenance and protection. Typically, a power switch is used to control a device to turn on or off. At this time, you can take advantage of the automatic startup of industrial computers. As long as the device is powered on, the industrial control motherboard or industrial control computer can automatically detect the power supply, automatically turn on and start working.
Applicable models: H6 series
Let’s introduce the setting method below;
1. Use a screwdriver to remove the four fixing screws on the bottom case, and then you can see the motherboard after disassembling the bottom case.

• 2. Find the PWRON1 pin on the motherboard. A jumper is pre-inserted on this pin. It is connected to pin1 and pin2 by default. When plugged into pin1 and pin2, the power-on self-start function is not enabled. When the jumper cap is moved to pin2 and pin3, self-starting can be achieved when power is turned on.