M3-12\13 th Gen configuration power-on auto-start steps
author: VENOEN
2023-12-05
- Applicable to M3-12th and 13th generation models
- step 1
1. Confirm that the keyboard is connected to the computer (it is recommended to use a wired keyboard, as Bluetooth keyboards cannot enter the BIOS), press the switch button and quickly tap the Del key on the keyboard to enter BIOS Setup;
Step 2
After entering the BIOS, select Chipset>PCH-IO Configuration>Configure Power Failure to Always off;
- Step 3
After the configuration is completed, press the F10 key on the keyboard to save and exit;
"P01GM" How to configure the power-on auto-start procedure?
P12B-How to set Auto Power on +1 Key restore CMOS
Related Article
