P09-6L Auto Power On

author: VENOEN

2025-08-18

preparation, tools
Phillips screwdriver PH2 *1
Please cut off the power before operation

1. Use a screwdriver to remove the four fixing screws on the bottom case, and then you can see the motherboard after disassembling the bottom case.

2. Find the PWRON1 pin on the motherboard. A jumper is pre-inserted on this pin. It is connected to pin1 and pin2 by default. When plugged into pin1 and pin2, the power-on self-start function is not enabled. When the jumper cap is moved to pin2 and pin3, self-starting can be achieved when power is turned on.

How to enable Auto power on an industrial tablet?

P16/H7(Generation 6 and above)Auto Power On